Showing all 4 results

Show sidebar
MENSOLAMETALLO
Close

Metal riser mounted bracket

The design of the metal riser mounted bracket was created to give an alternative to the beam, for the particularly high steps that do not allow a seat height between 40 and 45 cm, in order to optimize costs and facilitate cleaning operations being the step floor free from any structure. Its versatility allows it to be suitable with all OMSI products; its essential and clean line is perfectly matching with any seat Standard dimensions: depth: 325 mm; width 340 mm; height 280 mm. (Possibility to change the size as needed.) Material: hot galvanized FE360 or finished with cataphoresis and painting; extremely strong and anticorrosive. Installation: directly on the step riser. Anchoring: seat fixed on the bracket by self-tapping screws; fixation of the complete unit on the step riser in 3 points by means of mechanical anchors, stainless steel nuts and washers. DIMENSIONS:
width 340 mm
depth 325 mm
height 280 mm
  Contact us
Close

Riser mounted polyamide bracket

The design of the riser mounted polyamide bracket first started to give an alternative or even replace the metal structure to support the seat, in fact, the recycled polyamide fiber glass has the characteristic of being corrosionproof and extremely durable. Its versatility allows it to be compatible with all the OMSI seats, the simple and clean profile matches perfectly with any seat.  VERSION 1: M90-M2004-M2000-M2003-M2009-M2010-M2011 VERSION 2:  For seats model: M96 - M2008.  DIMENSIONS:
width 340 mm
depth 310 mm
  Contact us
Close

Metal rising spacer

Omsi spacer is an excellent solution to raise the height of the spectators seats on the steps, when it turns out not to be sufficient with the seats fixed directly on the steps. Our technical proposal is effective to keep both the visibility curve, and the compliance with the standard EN 13200, which recommends a minimum seat height of 400 mm, and a maximum of 450 mm.    Contact us
Close

Polypropilene rising spacer

FOR MODEL: M90 - M2004 - M2008 - M2000 - M2010 - M2011 - M2003  Omsi spacer is an excellent solution to raise the height of the spectators seats on the steps, when it turns out not to be sufficient with the seats fixed directly on the steps. Our technical proposal is effective to keep both the visibility curve, and the compliance with the standard EN 13200, which recommends a minimum seat height of 400 mm, and a maximum of 450 mm.  The possibility of using the polypropilene spacer matching the seat color, provides an extremely robust, vandal resistant, and aesthetically pleasant solution. Completely ribbed in the internal part, it has the possibility to be used for different Omsi seats, and to be overlapped, arriving to raise the seat of 100 mm from the step. The fixing is done in different ways complying with the most demanding standards, further- more the Omsi seats installed with this solution, maintain the standard vandal proof features unaltered and the compliance with EN 12727 standards level 4 severe.    Contact us